BUNDABERG, QLD ✦ CUSTOM STONE DESIGNS ✦ QUOTE BEFORE FABRICATION
CLICK AND COLLECT OFF CUT STONERECLAIMED STONE · BUNDABERG
BACK TO OFFCUT SHOP ↗
MADE TO FIT · YOUR VISION

Design your own.

Plan your vanity, benchtop or splashback in minutes. Add cutouts and choose edge profiles and top-face polishing, then save the sketch to request a fabrication quote.

01 / CHOOSE DIMENSIONS02 / ADD CUTOUTS03 / CHOOSE FINISHES04 / SAVE DESIGN
Before you save: Enter finished dimensions in mm, place any internal openings using manufacturer templates, then choose which sides need cutting or polishing. The displayed total includes provisional CNC allowances for selected openings. CNC charges are NOT final and require a workshop quote. No order or stone reservation is created here.
CUSTOM WORK IS QUOTED SEPARATELY. Basin, powerpoint, cooktop and tap openings are not part of standard Click & Collect. This tool prepares a concept for fabricator review — not a CNC-ready manufacturing file.
01

Choose your top

Enter the finished dimensions in millimetres.

View from above.Top = back / wall edge; bottom = front / room edge. Offcuts with existing holes or chips need a separate fabricator check.

02

Add your openings

Select a type. The designer draws it for you.

Measure positions from theleft finished edge and back finished edgeto the nearest edge of each opening. For round holes, positions refer to the hole's outer bounding edge, not its centre.

03

Choose your finishing

Select each edge, choose arris or 3 mm pencil round, and select top-face polishing separately.

Straight cutting — choose up to 2 sides

Choose at most one front/back edge and one left/right edge. Costs are calculated from the finished dimensions. Any unselected sides remain as supplied, subject to workshop confirmation.

No straight cutting selected.

Face polishing is separate from shaping the four outside edges. Existing face finish must be checked by the workshop.

The drawing marks finished edges in gold and a selected polished face with light shading. These are requests only: the workshop must confirm finish, suitability and a price.

04

Review & save

Download a fabrication brief with the estimated finishing price.

ESTIMATED TOTAL

Standard cutting and finishing for 20 mm stone are included in the total above. Select an offcut to include the stone price. CNC openings are quoted separately; workshop approval is required.

Required to save, print or create a fabrication request. This is a design enquiry, not an accepted order.

The PDF includes your sketch, every dimension, edge profiles, top-face selection and notes. Attach the saved PDF when emailing a fabricator. Email drafts don't attach files automatically, and nothing is submitted or ordered by this offline page.

PREFER IT SIMPLE?

Just need an offcut?

Our normal Click & Collect shop is for buying an existing piece, optional straight rectangular cutting and basic polishing. No basin, powerpoint or other CNC cutouts in quick checkout.

Shop ready-to-collect stone ↗